campaign

NHTSA Recall 18V100000 — Chrysler (FCA US LLC)

Official NHTSA recall 18V100000 covers 10 vehicle applications. Review the reported defect, safety consequence, remedy, and VIN-check next step.

Official identifiers and sources shown at claim level Data refreshed 8/28/2026

answer

What this official recall record says

NHTSA campaign 18V100000 was received on 2018-02-08 and is associated with 10 source rows covering 10 listed vehicle applications. The manufacturer shown in the record is Chrysler (FCA US LLC).

applications
10
campaign number
18V100000
potential units
180,462
manufacturer campaign number
U11

SOURCES

safety

What the owner should do next

Check the VIN in the official recall lookup. If the campaign applies, contact an authorized dealer about the remedy; recall remedies are normally handled through the manufacturer program. If warning signs or unsafe operation are present, stop driving and arrange safe transport.

do not drive
No
park outside
No
vin check required
Yes
recommended channel
dealer

SOURCES

causes

Defect described in the recall record

Chrysler (FCA US LLC) is recalling certain 2017-2018 RAM 1500, 2500, 3500, 3500 Cab Chassis, 4500 Cab Chassis, and 5500 Cab Chassis vehicles, all equipped with a column shifter. Pushing the brake pedal for prolonged periods when the vehicle is running and in PARK may cause the Brake Transmission Shift Interlock (BTSI) pin to stick in the open position. With the pin in the open position, the transmission can be shifted out of PARK into any gear without pushing the brake pedal or having the key in the ignition.

campaign number
18V100000
official record
NHTSA recall

safety

Safety consequence in the official record

Being able to shift the transmission without pushing the brake pedal and/or without a key in the ignition can increase the risk of an unintended vehicle rollaway that may result in personal injury or a crash.

do not drive
No
park outside
No

repair options

Official remedy

Chrysler will notify owners and dealers will update the Body Control Module software. Dealers will also test the BTSI operation, replacing the solenoid as necessary. The recall began February 26, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U11.

vin applicability required
Yes
dealer confirmation required
Yes

applicability

Vehicle applications listed for this campaign

The normalized NHTSA rows contain 10 applications across 1 makes and 5 model labels. This list describes campaign records, not confirmation that an individual VIN is open or unrepaired.

listed application count
10

components

  • POWER TRAIN:AUTOMATIC TRANSMISSION

applications

  • RAM
  • RAM
  • RAM
  • RAM
  • RAM
  • RAM
  • RAM
  • RAM
  • RAM
  • RAM

SOURCES

methodology

Limits of this database record

Campaign applicability and remedy completion are VIN-specific and can change. This page summarizes the official campaign record; it does not inspect the vehicle, determine whether a symptom is caused by the recalled defect, or replace current instructions from NHTSA or the manufacturer.

source rows
10
vin check required
Yes
individual vehicle verified
No